Friday, June 7, 2019
The media advertising for Conrack Essay Example for Free
The media publicizing for Conrack EssayThe appropriate media advertising for Conrack is most apt(predicate) to be the advertisements of a local scale rather than a issue scale. I believe that a good place to start is the local newspaper publisher, yellow pages, leaflet and local radio. On the other hand, a business like Eco-Store is most likely to be advertising on an network website, national newspaper and a specialist magazine or even television. The local newspaper is good for Conrack because many people of the surrounding community argon likely to take on it and it willing therefore reach a vast majority of the target market. One dis usefulness of the local newspaper is that the advertisement would be fairly slim and will cost in the region of i 51. It could in any case mean that the advertisement is hidden behind the bigger advertisements of bigger companies. The Local newspaper could also be a disadvantage in that not many people will be raise. Eco-Store on may ch oose to advertise in the national newspaper rather than local because of its vast stores located throughout the UK.It is an advantage because it means that there is national coverage, readers can refer back to the advertisement and its relatively cheap at i 20,000 for 3 months for a company who turnover i 200 million. There can be also be a lot detail provided. In contrast to this, there is no movement or sound the advertisement is usually boring as its limited to only cutting and white. The yellow pages are a good place to advertise for Conrack as there are different yellow pages for each region of the country.It is also an advantage as many people look at the yellow pages when they want to buy something auspicious such as timber. It is only a one bump off payment of i 367 for a 4. 5cm box for the whole year. This is well within the budget of Conrack. The marketing strategy for eco-store is to improve the Homely nature. The best way to do this is in the form of pictures. I thin k this might mean that eco-store could opt for television advertising. Television advertising is an expensive choice but it could prove to shew results very quickly.On advantage of Television advertising is the creative advertising can have a big impact on the business. They can shew Eco-Friendly being homely and can reach a vast audience. In contrast to this, its expensive, the message is short lived and many consumers switch channels when there are advertisements as there is now a vast amount of other program choices with the newly digital television. The other option for Conrack could be to advertise on the local radio in recent years this has been proven to be very effective.It could be advantageous in that it enables the use of sound, thought provoking messages could be used, produced relatively cheaply. On the other hand, it isnt visual, no copy of material, consumers may forget as there is nothing to refer back to. Eco-friendly may choose the internet as an advertising medi um as it has wide coverage, cheap to set up, global, number of hits can be measured. Both companies could incorporate the use of specialist magazines. This will mean there are more effective consumers that are willing to buy the timber.It also means that many people may be interested and could attract local businesses to buy products in bulk. Both businesses could use many types of advertising that could enhance the image of there businesses and no business is limited in using each type of advertising medium. The best type of advertising is one which results are quickly seen. There are many other forms of advertising a business could use depending on the type of people they want to target and number.
Thursday, June 6, 2019
Preparing for the BMAT (biomedical admissions test) Essay Example for Free
Preparing for the BMAT (biomedical admissions test) EssayThe biomedical admissions test was created to assist medical and veterinary schools in the admissions process. Some of the universities take away much more(prenominal) applications than places and the legal age of these applications are strong. The BMAT on the wholeows the universities to filter out the strongest candidates based on exam performance. The BMAT exam lasts for 2 hours and is split into 3 sections. The examination test date is 31st October 2008. This obligate go forth aim to provide you with nearly advice and give an overview to students who are planning on taking the BMAT exam. aptitude and skills (1 hour) scientific knowledge and application (30 minutes) writing problem (30 minutes)The universities which currently require you to take the BMAT are The university of Cambridge The university of Oxford Imperial college London The royal veterinary college University of central LondonAptitude and SkillsTh is section aims to explore your problem figure out skills, your ability to understand and interpret data and your analytical skills. It is multiple choice for the most. This is the main reason as to why you should guess intelligently, take a savor at the given data and take a guess. Practice is key in this section. For the problem solving element of this section look at all the given data carefully. Here are some techniques to service you. Divide and conquer technique Break down any large chunks of data into small chunks, making the smaller problems which are easier to solve and then once you have solved them put the data back together and form an answer. Trial and fallacy Use different approaches to come to a final conclusion and answer. Working backwards start with one of the possible answers and work backwards from it. Incubation This is a last resort method which seldom works. Put all of the starting details relating to a problem in your mind picture them and then break er point focvictimization on them and carry on with the examination (take an intelligent guess). Your subconscious mind may come up with an answer during the rest of the examination The ground and interpreting subset involves using the information in front of you, do non remove assumptions unless it is appropriate to the question. Analyse all data given carefully not leaving anything out. The data analysis subset involves extracting certain points out of the data and using these to make suitable conclusions, to give the answer. Depending on the starting data you are provided with this could take on using statistical methods, interpreting graphs, curve fitting or even eradicating unwanted information and prioritising said data.Scientific knowledge and applicationThis section attempts to make students utilise their scientific knowledge to help them answer questions. Again this section is multiple choice, so make informed guesses when there is a need using the data given. This sect ion also requires practice and modification of scientific principles in order to score high marks, so we advise you do some revision covering the basics of biology, chemistry and physics.Writing taskThe writing task is asking you to create an strive from a given question. Here are some cosmopolitan pointers to help you achieve a great score. Read Read articles, newspapers, journals and book. This will help you to gain an understanding of how to put forward logical legal opinion and will also help improve your English writing skills Partake in group discussions/debate forums By doing this you will develop the skills that allow you to probe certain situations and statements, in addition to developing the ability to generate a fair argument looking at both sides of the situation and can help you produce good conclusion. Good structure Ensure you have an introduction, Main body and conclusion. By having an assigned essay structure your ideas will flow more freely and will follow a logical order that makes it easier for the reader to understand. Snappy conclusion and introduction the introduction and conclusion can be the sections of your essay that sell it to the reader. Because these are the first and last things they read and so will remain in their mind the longest. An extremely good conclusion will quiver in the readers head and maybe it might help you to boost your mark.ConclusionOne key aspect for revision regarding the UKCAT is to sit some mock BMAT examinations this will allow you to get a feel for the allocated time slot for the exam and thus ensure that you can finish all the questions. Some final general pointers I would like to add are 1. Dont waste too much time on one question.2. Generate a compact plan for your writing task, just pointing out what you are going to cover and in what order. 3. Make sure you get plenty of rest before the exam.4. If you have time available at the end of the exam use it to check over your answers.
Wednesday, June 5, 2019
The Concrete And Fibre Reinforcement Construction Essay
The concrete And Fibre Reinforcement reflexion EssayCHAPTER 1 deep down the avocation dissertation I become to study the exercise of Fibre Reinforced Concrete in spite of appearance the reflection labor.Over the last decade, part built concrete (FRC) has become widely custom in different structural and non-structural applications such as pavements, floors, overlays, industrial slabs and shotcrete linings etc where the major concern is toughness and jump convolution in flexure. It is estimated that more than 150 000 metric tonnes of FRC has been utilize throughout this duration of time.Particular focus will be made as to FRC within the social structure persistence whilst trying to identify what the coming(prenominal) hold for this composite material.The question will be posed at to what the general consensus is within the construction industry in go through to the use of roughage reinforcement within concrete.1.2 Concrete and Fibre ReinforcementConcrete is a materia l that is very strong in densification although is comparatively weak in tension. To compensate for this imbalance in the concretes behavior, an appropriate reinforcement must be cast into the concrete to help yield the tensile loads.Two forms of reinforcement commonly used be Steel Fabric (Rebar) reinforcement and Fibre reinforcement.Steel Fabric Rebar/Mesh has been used for more years in the construction industry to reinforce concrete and is usually made of carbon vane which is incorporated with ridges to help provide a bring out bond and adhesion to the concrete. As the rate that both steel and concrete expand and contract is the same this assists in eliminating any possible issues relating to any primordial signs of cracking within the concrete which could occur if the materials expanded and contracted contradictory to each other. This will assist in enhancing the overall strengthening of the structure.Rebar comes in sundry(a) lengths and thicknesses to accommodate diffe rent fictional characters and sizes of jobs. These bars can be tied unneurotic to form a grid or cage, this is highly effective for larger projects or alternatively mesh can be delivered in a variety of standard sheet sizes to site.An exciting alternative product to the above which could be used would be that of fibre reinforcement.The idea of using a fibrous material to provide tensile strength to a material strong in compression but brittle loses itself in the mists of time in ancient Egypt straw was added to clay rippletures in order to provide brick with enhanced flexural resistance, thus providing better treatment properties after the brick had dried in the sun.Fibre reinforced concrete is a composite material which entails a cementitious hydrated paste which is mixed with downhearted reinforced filaments for instance glass, steel, polymer or carbon fibres which come in non-homogeneous shapes and sizes.The multiple fibres restructure the energy within the concrete, preven ting the procedure of formation and extension of cracks.This helps to annex the ductility within the concrete whilst sustaining the residual capability during the post cracking periodThe fibres within the concrete literally bond the sides of a forming crack in concert at the same time as preventing any visual damage from becoming apparentAlthough FRC is an application that has been used extensively throughout Western atomic number 63 and beyond, its use within the UK has been somewhat restricted to the purpose of reinforcement within industrial floors as its main application.The absence of a recognizably accepted cast standard may defy an influence on the situation although calls are currently world made for clear industrial guidelines to be certified.The Concrete family Technical Report 63 concentrates on any problematic issues and provides guidance for current and future conception.All information and design aspects associated with fibre reinforcement are incorporated within the British Standard Institution.BS EN 14889, Fibres for concrete Part 1 Steel Fibres Definition, specifications and conformity.Part 2 Polymer Fibres Definition, specifications and conformity.1.3 AimThe main aim of the following theses is to investigate and evaluate the various properties and functions of Fibre Reinforced Concrete (FRC) throughout the construction industry whilst giving consideration as to what lies ahead for the future of FRC.1.4 ObjectivesTo provide a historic overview of Concrete and Fibre Reinforcement.To identify and analyze the various types of fibre products available for concrete reinforcement.To establish possible concrete mix dressance enhancements associated with FRC.To explore the Construction Management criteria within the industry in relation to the use of FRC.To highlight the future possibilities and potential that FRC has within the construction industry whilst seeking the views and opinions of various construction professionals.1.5 Rationale for ResearchThere are three main reasons why this particular topic has been chosen for this theses along with the require research which has been carried out, these areA personal by-line in the material of concrete along with its various functions and applications due to take a shit experience gained in this field.An interest in new innovations being made available to the construction market which will enhance the overall application of the material.An aspiration to investigate whilst enhancing my current noesis on the theory of FRC1.6 MethodologyDue to the nature of the topic to meet the aims and objectives previously set out for this thesis and to establish the direction for this piece of work information has been produceed from the following sources.Primary Literature Academic Research Journals (Refereed)Conferences / Seminars (Referred)Government PublicationsTechnical Report PapersSecondary Literature Construction JournalsConstruction Textbooks subroutine library Search Index es and AbstractsInternet / World Wide WebLibrary CatalogueCase scan A case study of fibre reinforcement with regard toConstruction Management criteria will also be analyzed via various site visits prior and during any works being carried out.This will provide a valuable insight as to how this product is perceived whilst strengthening the case for use in the future.Questionnaire Questionnaires will also be distributed to variousProfessional bodies influenced by the use of FRC within the construction industry.The methodology adopted is fully discussed afterwards in Chapter 4 along with the analysis of the research findings in Chapter 5.1.7 Chapter OverviewChapter 1 basisProvide a brief introduction into the areas of study which has been identified by the author whilst outlining the main aims and objectives to be achieved in order to fulfill the research criteria.Chapter 2 Background for Study (Literature Search)A review of the relevant theory and recent / current publications associ ated with Fibre Reinforced Concrete will be used to obtain the necessary information required to establish the Aim and Objectives which have been prepared by the author.Chapter 3 Case StudyOn site Case Study (tbc)Chapter 4 MethodologyAn evaluation of the types of research and methodology methods carried out in order to achieve the aims and objectives previously stated.This will describe how and why the chosen research methods had been adopted.Chapter 5 Data Interpretation and AnalysisThis will consist of an analysis of the data and information generated from the questionnaire returns using relevant diagrams, tables and text to illustrate all findings.Chapter 6 Conclusions and RecommendationsAll findings from the research process will be compiled and it will be observed as to whether the main outlined objectives have been realized.Recommendations will also be given on areas of further research to enhance the material within the theses.CHAPTER 2A REVIEW OF FIBRE REINFORCED CONCRETE2.1 History of Concrete and Fibre Reinforcement.The history of composite materials started in ancient Egypt over 2000 years ago with mud bricks, reinforced with straw fibres.(Crowther, 2009)Concrete is the second most widely used material on earth after water (The Economist, 2006)Concrete is a building material composed of cement, aggregate sand and water, often with chemical admixtures and other materials (Stanley stick, 1999).Its modern development spans less than 200 years with 1824 being the patent date associated with the first Portland cement, according to Binns (2002), which is one of the most measurable milestones in concretes history.Concrete is an constantly present material and its versatility, comparative cheapness and energy efficiency have ensured that it is of great and increasing importance for all types of construction throughout the world.Many structures have concrete as their principal material, albeit as a composite with steel to give every reinforced or prestr essed concrete, even in those structures where other materials such as steel or timber form the principal structural elements, concrete will normally still have an important role, for example in the foundations.In its simplest form, concrete is a mixture of cement, water and aggregates in which the cement and water have combined to bind the aggregate particles together to form a monolithic whole. (Illston Domone, 2001)(Sutherland, 2009) explains that even though our knowledge and understanding of the material is far from complete, and research continues, concrete has been successfully used in more cultures and in many civilisations.It is not just a modern material the oldest concrete discovered so far is in southern Israel, and dates from about 7000 BC. It was used for flooring, and consists of quicklime, made by burning limestone, mixed with water and stone which set into a hardened material.Fibres mixed into the concrete can provide an alternative to the readying of conventiona l rebar or steel fabric mesh in some applications. The concept has been in existence for many years (the first patent was apply for in 1874) and it has been used in a range of applications amongst the first major uses was the patching of bomb craters in runways during World War 2. However, it was during the 1970s that commercial use of this material began to gather momentum particularly in Europe, Japan and throughout America. (Clark, 2007)Crowther (2009) reiterates that throughout the 1960s research by various scientists which intromitd Romauldi and Mandel who were industrial scientists,In the 1960s, studies by Industrial scientists Romauldi, Mandel and others, created the hypothetical and experimental foundations to help realise the development of a steel fibre product which could be used to as a means of reinforcing and strengthening concrete.In the early 1970s, James Romauldi who was initially take ond in establishing the creation of the steel fibre patented the philosophy of steel fibre reinforced concrete, essentially inventing a new material for use within the construction industry.Throughout the 20th century the appliance of asbestos fibre cement was extremely common and extensively utilised whilst more recently it has continued with the use of highly developed carbon fibre substances which have previously been more associated within the specialised aerospace and automotive industries.Glass fibres were introduced and research continued into harnessing the properties of synthetic fibres such as polypropylene along with various other plastic materials.By 2000, the first macro instruction fibre, concrete was ready for production from various suppliers. (Tarmac, 2009)Fibre reinforced concrete is employed around the world on major construction projects which involve infrastructure works, tunnel linings, marine environments, pre cast and insitu walling systems, low shrinkage thin screeds, sprayed concrete applications and significant reinforcement struct ures.Throughout the UK, its general application is in the use of large industrial concrete floors.Characteristics which are extremely beneficial following the installation of the floors is the better in impact resistance, this helps minimise any possible unessential damage where high volumes of belligerent traffic is expected.The table below Figure 2 clearly shows how concrete is affected by the addition of fibres in various application fieldsTable 1 Concrete improvement by fibresApplication fieldStrengthCrackingWearClosure systemsTunnelsSole plates / root cellar wallsSewer systems / pipesPrecast elementsToppings / wear layersRoads / airfield pavingIndustrial floorsFigure 12.2 Types of Fibre Products used For Concrete ReinforcementAlthough on that point are numerous fibre products on the market the most commonly used fibre types are shown and discussed below giving information on the producer of the fibre, its properties, fibre content in appliance along with the effects of the f ibre type within the concrete matrix.2.2.1 Steel FibresConcrete containing steel fibres has been shown to have substantially improved resistance to impact and greater ductility of failure in compression, flexure and torsion.(ACI Special publication sp-44)(Bentur Mindess, 1990) claim that it was throughout the early 1900s that steel fibres were first introduced into being mixed with concrete to provide the required reinforcement.The early design of steel fibres was relatively simple and consisted of a rather plain round and smooth design which was cut to the necessary lengths.Only more recently has the introduction of hooked end, indented etched roughened surface, crimped and new polygonal twisted modern fibres have been introduced whilst the legitimate smooth fibres have mainly disappeared.More up to date fibres which are available commercially are contrived from drawn stainless steel telegraph or by a melting and moulding process which produce fibres which have a crescent profil e cross section.(Concrete Society TR 63, (2007)) points out that steel fibres are produced by various processes as discussed above and are supplied in many different shapes and sizes as is shown below in Figure 2. They may either be straight or deformed, however most are round in cross section with diameters between 25 and 60 mm. Steel fibres have a tensile strength typically 2-3 times greater than that of traditional fabric reinforcement and a significantly greater surface area (for a given mass of steel) to develop bond with the concrete matrix.Figure 2(Neville, 1995) points out that the configurations of fibres can be either straight, continuous-deformed, or end formed as shown previous. Initially, straight fibers were the only configuration of steel fibers available. After further investigation it was quickly learned that there bonding potential was limited which restricted there expected contribution to the engineering properties of concrete.New products were developed to incr ease the bond between the fibre and concrete, the two best configurations which emerged were A hooked end, draw telegram fibre and a continuously deformed, slit sheet steel fibre.It was determined that the continuous deformed, slit sheet steel fibre provided better micro macro cracking performance as well as flexural strength enhancement, whereas the end deformed, drawn wire steel fibre performed best post first crack.As a feature of steel fibre reinforcement concrete its improved ductility helps to greatly enhance the application where impact resistance is important.The characteristic of fag out resistance within the concrete is highlighted a being increased by up to 70%.(Clark, 2007) explains that the addition of steel fibres as supplementary reinforcement in concrete minimise the possibility of spalling of the concrete surface due to any inclement temperatures or weather conditionsSome of the physical characteristics of fibres directly affect spot aspects of concrete performanc e while others are less important. The factors considered to have the strongest influence on the performance of the steel fibre in concrete areBond and Anchorage mechanisms (e.g. straight or deformed shape, end cones or hooked ends)Fibre length and diameter.Dosage used in concrete pours. (kg/m3)Fibre librate (number of fibres per kg of fibre), which is a function of fibre size and dosage.Tensile StrengthElastic Modulus(Hannant, D 2002) outlines that fibre reinforcement in concrete act in various ways. Firstly they can remove the formation and development of cracks due to early age plastic settlement and drying shrinkage. Secondly, they may provide a level of post cracking load carrying capacity.The mechanisms are as followsSteel fibres, being randomly distributed in the concrete, intercept micro cracks as they form, inhibiting the tendency for them to form into larger cracks.After cracking, the fibres spanning the crack will provide a residual load carrying capacity. The capacity can be considerable, depending on dosage and the type of fibre used. chase a shrinkage case study carried out by Propex concrete systems the photos below evaluate the initial 24 hours of curing time comparing a traditional reinforced slab with wire mesh against a fibre reinforced slab.The traditional (control) slab started to crack within 3 hours whilst the fibre reinforced slab continued to perform whilst maintaining its integrity, this is shown below in Figure 3.Cracks within the concrete which occur at an early stage will only endanger the reliability whilst preventing the concrete from ever attaining its maximum performance capability.Figure 3The explanation for this early age damage to the slab is relatively simple traditional mesh refrains from functioning until there is consummation within the slab and the concrete cracks, for there to be any possibility of the fibre mesh to work the slab would have to be designed ensuring that the mesh had been placed In the top third of t he slab.As has been previously mentioned there are various shapes and sizes of steel fibres which are used two examples which are used within the construction of industrial floors are shown below in Figures 4 and 5.Figure 4 Figure 5Figure 4 shows four different shapes and sizes of fibre products which include smooth surface, indented etched, roughened surface and round with hooked ends which are the most commonly products used in regards to steel fabric reinforcement. Whereas Figure 5 gives a more in-depth description on the bundled hooked end product.2.2.2 Synthetic FibresStraight or deformed pieces of extruded, orientated and cut polymer material, generally polypropylene, that is suitable for mixing in concrete. macro instruction fibres have a diameter greater than 0.3mm micro fibres have a smaller diameter(ACIFC, 2007)(Concrete Societys TR66, 2007) considers that polymer fibres can be described and categorised into the following large synthetic fibres which are generally greate r than 0.3mm in diameter and are used where an increase in post cracking flexural strength is required. Macro synthetic fibres can be incorporated within the design of structural concrete.Micro Synthetic Fibres are relatively similar to the previously mention Macro synthetic fibres although they are smaller in size along with the inability to fulfil any structural role within any concrete design.Characteristics of this type of fibre include the ability to reduce the instance of plastic shrinkage cracking along with acting as an enhancement for freeze thaw resistance.ReferencesIllston, J.M. and Domone, P.L.J. (2001) Construction Materials There Nature and Behavior 3rd Edition. P91. Spon Press.Sutherland, M. (2009) Concrete Engineering International Volume 13 Number 2. Summer 2009. The Concrete SocietyRomtech. (2009) Technical suffer Products accessed 30th October at http//www.rom.co.uk/products.aspxCrowther, D. (2009) Concrete for the Construction Industry Journal Volume 43 Number 3 April 2009. The Concrete Society.Clark, J. (2007) Technical Report No. 63 Guidance for The Design of Steel Fibre Reinforced Concrete. CamberleyHannant, D, Fibres in concrete A Perspective. Concrete, Vol. 36, No 8, September 2002, pp 40 43.Tarmac. (2009) Topforce Fibre Reinforced Concrete accessed 12 November at www.tarmaconline.com//0982%20Tarmac%20Fibre%20Reinforced%20Concrete%20Brochure.pdf.Propex. (2006) Propex Concrete Systems accessed 13 November at www.CS-500_Propex%20Concrete%20Systems%20Brochure_Jul%2006 (1).Pdf.Anon., (2006). Concrete Possibilities. Economist Technology Monthly. The Economist, 380 (23 September), p32.Anon., (1972). American Concrete Institute, an International Symposium Fibre Reinforced Concrete, Detroit ACI, 1974. (ACI Special Publication SP-44)
Tuesday, June 4, 2019
Beer spoilage associated with Pediococcus spp
Beer spoilage associated with Pediococcus sppIntroductionIn average lager fermentation gradual decrease of pH and specific gravity is expected trance ethanol concentration is increasing. Some flavours atomic number 18 also formed during fermentation as esters and other flavour compounds ar formed. They washstand re of import in beer or be gradually filld either due to evaporation or further metabolism of barm. Deviations from the average pattern of changes can signalise a contamination. agitation wort is therefore routinely tested for its gravity, pH and also for flavour and odour.In a sample tested speedy decrease of pH at the demise of fermentation was noned. pH reached 3.7 which was well below expected 4.1 (Hough 2001). Such significant fall suggested bacterial contamination. Two groups of bacteria may cause lowering of pH. These atomic number 18 Acetic sultry bacteria and lactic Acid Bacteria.pH decrease was noted late in fermentation when no oxygen was available sugges ting Lactic Acid Bacteria. Strong diacetyl odour (sweet-buttery), turbidity and cartridge clip indicated Pediococcus spp., probably Pediococcus damnosus since it is the most common beer-spoiling bacterium in its genus .The spoilage characteristic associated with Pediococcus spp.Lactic Acid Bacteria are the most common contaminant in fermented wort and beer. They can be responsible for up to 90% of microbial beer spoilage incidents (Taskila et al. 2009). Within them two groups are recognised as the most common contaminants Lactobacillus and Pediococcus.The symptoms of bacterial contamination by member of any of those two genera are similar lowered acidity (giving to the beer untrue taste) caused by production of lactic acid by the bacteria and diacetyl (buttery) off-flavour. The latter one is the main reason why pediococcal contamination is so unwanted. According to whiting (1992) as few as 20,000 bacterial cells per 1ml can produce diacetyl in concentration of 0.36mg/L, which is 3 times higher than the taste threshold. Spoilage by Pediococcus is ofttimes characterised by ropines, but some of Lactobacilli can also give similar symptoms. Presence of any of those lactic acid bacteria negatively influences barm movement and health slowing down fermentation (Priest 2006).Further investigation is required to determine spoilage microorganism, the cause of contamination and methods of removing unwanted bacteria from the system.Pediococci are spherical, deoxyguanosine monophosphate positive bacteria that often form tetrads, but also may appear in pairs (Priest 2006). Generally they are catalase negative, but in low glucose specialty they can produce pseudocatalase that can also break hydrogen peroxide, which may lead to false catalase test results (Priest 2003). They do not form spores and are nonmotile. The main product of their metabolism is lactic acid (homofermentative bacteria) and thought they are anaerobic they can tolerate nominal head of oxygen (Priest 2003). The species that can inhabit fermenting wort and beer are hop resistant.Following species have been isolated from beerPediococcus damnosus (formerly in brewing literature also referred to as P. cerevisiae), which is found in beer, late fermentation and brewing yeast (also wine) and is thought to be responsible for 90% of all spoilage incidents caused by Pediococci (Priest 2003, Whiting et al. 1992, ).Pediococcus inopinatus found in beer, brewing yeast, vegetables, wine, milk (Priest 2003).Pediococcus dextrinicus (Priest 2003).Pediococcus pentosaceus (Priest 2003).Pediococcus claussenii (Priest 2006).Isolation and confirmation of the presence of Pediococcus spp.To detect presence of Pediococcus species in wort it should be first filtrated (volume 100ml). A 0.2 0.45 microns membrane filter is recommended. (Lewis and Bamforth 2006).Colonies should be incubated then on suitable medium (e.g. MRS1with Actidione to suppress yeast growth, Raka-Ray or NBB medium) for 5 days in tempe rature 25oC in anaerobic conditions (Lewis and Bamforth 2006, Briggs et al. 2004).Grown bacteria can be Gram-stained and examined under microscope. Gram-positive cocci organised in tetrads suggest Pediococcus spp. although that should be checked by further testsCatalase test should be negative no bubbles formed after dripping 3% H2O2 solution onto colony. Colonies outgrowth have sour odour.No gas should be produced from glucose using Gibson and Abd-el-Malek method (Priest 2003, p. 211).An improved methodology for the recovery of Pediococcus spp.Traditional methods of identifying bacteria are very time consuming. The results are too slow for commercial requirements and may result in dispatching a product that does not meet health and safety criteria. Therefore rapid testing methods were developed to identify spoilage microorganisms. There are used in diagnostic tests, often designed specifically for a given industry, such(prenominal) as LightCycler foodproof Beer Screening Kit.The LightCycler foodproof Beer Screening Kit is based on polymerase chain reaction (PCR). In order to carry on the test sample has to be filtrated and inoculated into enriching broth as the count of about 1000 cells/ml is required to increase reliability of the result. The sample is then centrifuged, cells are lysed and DNA extracted, amplified and identified.The test can detect 24 most common species of beer spoilage bacteria of genera Lactobacillus, Pediococcus, Pectinatus and Megasphaera and identify Pediococcus damnosus as well as P. inopinatus, Lactobacillus brevis, L. lindneri and Megasphaera cerevisiae (Biotecon 2009).The method is very quick in study to traditional methods (2 days versus up to 14) but is much more expensive. It requires three more kits and specialist equipment to carry the test and read the results, therefore can not be applied in small breweries.SolutionPediococcus damnosus was found in the fermenting wort and in beer. Special cleaning regime was employed with use of antibiotics to remove contamination as well as acid wash was implemented to pitching yeast.ReferencesBIOTECON. 2009. http//bc-diagnostics.de/?cid=1201264657lang=1name=foodproof+Beer+Screening+Kit%2C+Hybridization+Probes+(LC+1.x)+http//www.bc-diagnostics.com/public/DB_Data/files/Downloads/BeerScreening.pdf leaflet. Biotecon Diagnostic GmbH. Potsdam.Briggs, D.E., Boulton, C.A., Brookes, P.A., Stevens, R. (2004). Microbiology. In Brewing. acquisition and Practice. pp 606 649. Woodhead Publishing Limited and CRC Press, LTD. Cambridge.Hough, J.S., (2001). The Biotechnology of Malting and Brewing. Cambridge University Press. Melbourne.Lewis, M.J., Bamforth, C.W., (2006). Microbiology. In Essays in Brewing Science. pp. 58 68. Springer Science+Business Media LLC. New York.Priest, F.G., (2003). Gram-positive Brewery Bacteria. In Brewing Microbiology. tertiary ed. (ed. by Priest, F.G. and Campbell, I.). pp 181 218. Kluwer Academic/Plenum Publishers. New York.Priest, F.G., (2006). Microbiology and Microbial Control in the Brewery. In Handbook of brewing. 2nd ed. (ed. by Priest, F.G. and Stewart, G.H.). pp 607 628. Tylor and Francis. Boca Roca.Taskila, S., Nebauer, P., Tuomola, M., Breinstein, A., Kronlf, J., Hillukkala, T. (2009). Improved Enrichment Cultivation of Beer Spoiling Lactic Acid Bacteria by Continuos Glucose Addition. In Journal of Institute of Brewing. Vol. 15. No 3. 177-182.Whiting, M., Crichlow, M., Ingledew, W.M., Ziola, B., (1992). Detection of Pediococcus spp. In Brewing Yeast by a Rapid Immunoassay. In use and Environmental Microbiology. Vol. 58. No 2. 713-716
Monday, June 3, 2019
Benefits of Green Supply Chain Management
Benefits of reverse lightning come forth mountain chain circumspectionConsciousness ab forbidden the environs has been on the increase in the past a couple of(prenominal) decades. Worlds environmental problems such as global warming, toxic substance usage, and decrease in non-replenish adequate to(p) resources has caught up amongst the people now. The Governments around the world be releasing campaigns to ready this problem to people. Quite a few organizations have responded by using ecological principles to their business, such as step-down the energy use of oil, using environment onlyy friendly squargon first, and using recycled paper for packaging. Ecological principles have been extended to many departments within the organization, including the leave arrange. environmental management of the bring out drawstring (GSCM) make its appearance in recent years. This concept encompasses all steps in the manufacture of the first to the last stage of the lifecycle, from prod uct design to recycle. dark- leafy vegetable tote up Chain steering tail end withal be used for other economic sectors like government, education and services apart from manufacturing.The aim of this paper is to distill the impact of colour in the management of the supply drawstring. It starts with the basics of total Chain Management of the company at different levels. Then he covers the chronology and the benefits of gullibleness offer Chain Management. What factors influence society to adopt the spurt confer Chain?These factors faeces be classified according to different players such as government, whole of market, industry, competitors, and society. Since green Supply Chain Management can be applied to various beas within the company, this document also addresses the implementation of putting green Supply Chain Management in sev sequencel argonas.In addition, a few examples of Green Supply Chain Management application is also demonstrated to support the concept. display panel of Contents (jump to)IntroductionBasics of supply chain managementSupply Chain IntegrationChronology of GSCMObjectives of GSCMListening to Environmentally Aw ar ConsumersProfiting from Being Green unknowing of Potential BenefitsGreen nameGreen OperationsThe Case of Kodak Green Technological AdvancementWhy Change to Green Supply Chain Management?ConclusionIntroductionSupply chain management has been viewed conventionally as a process in which the raw materials are converted into finished products, and are then provided to the end-customer. This whole course of action requires extraction and exploitation of various natural resources. The accuse to be noted here is that however, we live in an era where environmental sustainability has conk an important tinct to business practices. Manufacturers for a very long time now have been facing the pressure to concentrate on Environmental Management (EM) in their supply chains. However it is not at all an easy task to perform . The blending of the green concept to the supply chain concept affixes a new concept where the supply chain will bear a straight relation to the environment. This fact is interesting because both these paradigms were at odds(p) in the past. Supply chains, from an doingal point of view, are all about mining and exploiting the raw materials from the environment.This paper will present a general creative thinker about the Green Supply Chain Management (GSCM) literature. Knowledge of the broader outlook of the Green supply chain is the most important step in getting an insight about the branch of environmental sustainability. There is a vast span of literature available on the subject of green supply chain management, especially from mid-nineties to the present. But the key arguments that were drawn out of the Green supply chain Management literature over the last almost 2 decades are the concepts of green design, green operations, green manufacturing, gaga management and reverse logistics. The purpose of this paper, however, is to provide insights on some of these topics and present an overview of the academic standpoint of the Green Supply Chain Management literature. This paper will begin with discussing the traditional supply chain management and will then proceed by travel on to chronology of the Green Supply Chain Management. This paper will then further move on to talk about the idea of Green Design and Green Operations. At the end, this paper contains a brief talk about why organisations go for a Green supply chain?Basics of Supply Chain ManagementThe term supply chain originated around the mid 1970s. Supply chain was used as a term for transferring on electrical energy towards the final customer. However the term supply chain management came into the picture not until the late 1980s. The potential benefits of integrating the various internal business functions which include purchasing, manufacturing, sales and distribution into one interrelated fr amework were discussed. Since then supply chain management has been defined as the integration of business functions involving the flow of materials and education from inbound to outbound ends of the business. Twofold or party relationships between the suppliers are adequate a part of the supply chain process. Here the formulation of a supply chain framework in monetary value of establishing contracts between firms can be seen. The opportunity to either vertically integrate or market their products in connection with other partners has been given to the organisations.Supply Chain IntegrationThe concept of Supply chain management evolved dramatically around the early 1990s.It turned out to be so due the increasing importance of the relationship of the firm with other suppliers. One of the possible reason for this was the emergence of a globalised marketplace. The firms needed to exit more than integrative amongst other firms to reduce the susceptibility of its supply chain. Ther e are various examples and case studies where the firms have blend or are becoming more integrative to their supply chain partners. A few good examples can be 1.) the Japanese automotive industry andthe Italian craft-based industry.The operational processes of the supply chain are enhanced by the help of the added factors such as Lean and Just-In-Time (JIT) Management. The requirement of the organisations to become dynamically quick to respond to the needs of customers has become increasingly important.The contributing factors that would make firms more competitive arespeed (delivering customer demand quickly),agility (responsiveness to customer demand) andleanness (doing more with less)The Chronology of Green Supply Chain Management (GSCM)An emerging field that fibres out of the traditional supply chain perspective is Green supply chain management (GSCM). Businesses have been sparked to become more environmentally conscious by the feeling revolution in the late 1980s and the supp ly chain revolution in the early 1990s. Green Supply Chain Management has gained popularity in both academics and professionals to intend in reducing waste and safeguarding the quality of product-life and the natural resources. Now the important assets to achieve take up and state of art practices are Eco-efficiency and remanufacturing processes. The demand of the Global markets and pressures from governments are forcing businesses to become more sustainable. In my personal opinion, increase in government regulation and stronger man variety show mandates for environmental responsibility have brought these issues onto strategic planning agendas, and into the executive suites. The key argument that came out in the literature over the last deuce decades are the concepts of green design, green operations, reverse logistics, waste management and green manufacturing . The very first green supply chain came into existence in 1989. It was the first of its kind literature that developed a finest forecasting system for organisations to use and to forecast products that can potentially be reused/recycled. This forecasting system, however, was exceedingly controversial as individuals returning containers is not typically known with confidence, so in that stancefore, the findings were somewhat unintelligible.The first green design literature came into context in 1991 with the aim of considering the need for a green design to reduce the impact of product waste. Further Life-cycle psychoanalysis was an example of a structure that came out of green design.Green Operations in terms of reverse logistics was an important concept that came out of the Green Supply Chain Management concept. The use of plastics and bottle recycling came up by late 1990s and early 2000. Waste management is another topic that came out of the Green Supply Chain Management literature. Green Manufacturing, on the other hand, was not conceptualised until 1993.Objectives of Green Supply Chain Managem ent (GSCM)The purpose of the whole supply chain must be green to help the company achieve its environmental objectives. To ease this, employees must learn strategies on green procurement, understand business practices, corporate social responsibility strategies define, develop logistics processes more efficiently, and learn about the alignment of the chain supply to meet the goals of corporate sustainability.Every company that manufactures and sells products uses packaging materials every day. Packaging is used everywhere starting from moving raw material to a manufacturer followed by bulk finished goods to a distribution centre and in the end the final product to the customer. The packaging material executes a identification number of tasks protects the objects from damage, from the ecological circumstances, and also make the objects easier to transportation and to make the item eye-catching to the customer. However, as the publics opinion about the environment is changing, compa nies are looking at how they can shift to greener packaging alternatives. A few of the suggested alternatives areRecycled ContentIn packaging materials from recycled materials is available, including corrugated cardboard, molded pulp, cardboard, steel, newsprint, aluminum, glass and some but not all plastics. It is common practice to include some level of recycled content for certain packaging materials.Post-Consumer And Pre-Consumer ContentThe term post-consumer shows the finished products that were used by the consumer, then remote from waste for recycling. Materials recycled by households and non-residential users such as offices, manufacturers and retailers are included in the post-consumer materials. Examples of post-consumer materials include foam block, newspapers, glass and aluminum containers, and corrugated cartons.Pre-consumer content is different from post-consumer in that it includes the waste left by the methods of processing and printing, rejected by the manufacturer before it is used by the consumer. Either total recycled content by trust the totals for the period before post-consumer and / or the post-consumer recycled content is provided by the manufacturers. The environmental benefits are provided by both pre-consumer and post-consumer recycled materials. The use of recycled materials supply market with post-consumer items that are sorted to be recycled by consumers.Paperboard PackagingCardboard is used for packaging materials in a variety of industries because of its cost, versatility and low durability. Increasing amounts of cardboard with post-consumer recycled materials are used by businesses because of its quality, cost advantage and a reduced impact on the environment.Companies have adopted the use of recycled cardboard in products reaching the consumer in mind to improve the quality, variety and availability of recycled cardboard. Various studies around the world today show that over 50% of products on supermarket shelves are packe d in recycled cardboard.According to a survey conducted by the Alliance of recycled cardboard, 61% of consumers are more likely to buy a company that uses recycled cardboard packaging. The study also revealed that 77% of consumers felt up better about a company that uses recycled cardboard and 80% said do something good for the environment when they buy products with recycled cardboard packaging. This suggests that the growing consciousness of environmental issues by customers and the efforts that manufacturers regarding the use of recycled packaging does not go unnoticed.As companies move towards policies more friendly environment, a change effort that can be make throughout the supply chain that should not increase the overall cost is to improve the use of recycled packaging. Products such as recycled cardboard, which are now available are of high quality, low cost and are a major concern for consumers.Listening to Environmentally Aware ConsumersAs the community becomes more and more aware of the issues regarding the environment and global warming, consumers will be bound to ask more questions about the products they are purchasing. Some of the questions that the companies face today arehow green their manufacturing processes and supply chain are?How much is their carbon footprint? andHow they recycle?Profiting from Being GreenThe myth that going green will result in freeze off profits and increased operational costs has disappeared as many companies now have realised that its not a bad thing and have been able to satisfy the customers desires to incorporate green initiatives in their supply chain processes and also convert it into increased profits. A number of companies have established the fact that there is a link between improved environmental execution of instrument and financial gains. Companies have had an insight into their supply chains and found out areas where improvements in the focusing they operate can result into increased profits.Just f or an example usual Motors condensed their clearance costs by $12 million by setting up a reusable container program with their suppliers. In a desperate attempt to reduce the costs throughout their supply chain, General Motors derived that the cost reductions they realised allude the companys commitment to the environment, maybe General Motors may have been less concerned about the green issues if they were making record profits.Unawareness of Potential BenefitsBy reducing the environmental impact of their business processes, companies can find cost savings. Savings are often seen as an advantage to implement environmental policies, by retrospect the supply chain business, procurement, planning and management of material consumption for dispatch and delivery of finished products. Benefits attributed to reducing the environmental impact of a company are not in the minds of the executives of the supply chain despite the public emphasis on the environment. It shows that many execut ives are still unaware that improving the environmental performance of waste disposal and resulting low training costs, less the costs of environmental permitting, and often, reduced material costs. The expectation of an interest in environmental issues and environmental concerns by the community will not diminish as economic issues become more important because of the faltering economy..Green DesignGreen design is a vital sub-theme to Green supply chain management. It encourages environmental awareness about designing a product or a service. Organisations have specific potential to become eco-friendly in the direction of product re-manufacturing. Heavy industries that have intricate supply chains must take into concern the benefits of reverse logistics (RL). ISO14000 was introduced as a result of the Rio Summit on the Environment in 1992. The pressure groups calling for firms to encourage greening of their supply chains are growing. In 1998 a two-level location model is proposed o n product recovery with the support of the Dutch government. The role of purchasing in reverse logistics system and design was examined. All the manufacturing plants that participated in the in a higher place mentioned model concluded that all of them were in favour of reverse logistics without government legislation having been imposed.Life-cycle AnalysisLife-cycle analysis is an imperative part of Green Design. To measure environmental and resource related products to the production process life-cycle analysis was introduced. This measurement involves everything that comes in stages starting from extraction of raw materials, production, distribution, and remanufacturing, recycling and final disposal. Life cycle analysis scrutinize and enumerate the energy and materials used and wasted and measures the impact of the product on the environment. Government policies are also an additional feature for organisations to work in the direction of life-cycle analysis.Green OperationsRevers e logisticsReverse Logistics (RL) is the contrary of traditional or forward logistics. A process where a manufacturer accepts previously shipped products from the point for consumption for possible recycling and re-manufacturing is reverse logistics. Various studies report that reverse logistics have been extensively used in automobile industries such as BMW and General Motors. Other companies such as Hewlett Packard, Storage Tek and TRW are also using reverse logistics as a supply chain process. Following reverse logistics would preferably or later help firms become more aggressive and competitive in their own industry.First stage in the recovery process is the disposition stage. For remanufacturing products are selected, collected and transported to facilities. To begin the converging process, the used products came from different sources and should be brought to product recovery facility. When sorting reusable products Sorting and Recycling are also an important mechanism. The collection schemes should be classified according to materials whether separated by the consumer (separation at source) or centralised (mixed waste). The end objective is to arrange products that can be reused to trim down costs of making new products.Implementation of GSCM to various areasCompanies are investigating all aspects of their supply chain to reduce costs.A key member of any program of cost reduction is implemented waste reduction. There are a number of processes that can be used to reduce waste in the supply chain of a business.Design of productTo identify where the use of raw materials can be reduced or high-priced materials be replaced, many companies are probing the design of their products. Indeed many businesses are reviewing each component to identify whether it can be manufactured or purchased at a lower price. Companies are examining cheaper and less wasteful materials when designing product packaging options.Raw material ManagementEvery production process shou ld be investigated to reduce the waste of raw materials. Waste material that cannot be recycled or reused must be redesigned in manufacturing operations processes. Even in processes that do bring forth waste that can be recycled should be examined due to the costs in recycling processes.Using Scrap MaterialThe use reuse of waste material can be stretched out as well as minimizing the waste of raw materials in manufacturing processes. Improvements in the technology of reclaiming waste material means that companies that in one case discarded waste products now have the capability to reuse that material. The costs will inevitably fall helping more businesses with waste issues as the recycling technology becomes more available.Quality improvementQuality control is present in all manufacturing processes but usually aims on the finished product rather than reducing waste. Minimizing the waste of raw materials as well as producing a quality product should be the goal of quality managemen t. Improving the overall quality of a companys manufacturing process will reduce waste overall as it will increase the quantity of finished goods that pass quality inspection.The Case of Kodak Green Technological AdvancementSince the early 1990s, the need for technological advancement to Green Operations is becoming more popular. The new economy has encouraged firms to be more environmentally sustainable and eco-efficient. Kodak is an example of a company that has a remanufacturing line to the supply chain. It is reported that 310 million single-use cameras have been returned since 1990. Although the timing of returns of singleuse cameras is unknown, Kodak has managed to allocate 310 million singleuse cameras back off into their production line. The reason for this success came from its own product design. Kodaks single-use cameras are simple, reusable and easy to recycle, and because of this, Kodak has managed to reuse their products and save costs. Xerox Europe, US Naval Aviation are also good examples of Green Operations. Companies are encouraged to have Green Logistics due to various legislations.Producer responsibility has always been, and is still, a growing concern. This concern is important because organisations are now beginning to become more rational in preserving the natural resources and the environment.Why Change to Green Supply Chain Management?There are different thrusts for companies to change to a greener supply chain than the existing one. Some organisations are simply doing this because it is the right thing to do for the environment even though some of the motivators are quite unclear. Maybe some are more fundamental to environmental change, but others may not. Studies, however, reveal that favorableness and cost reduction are some of the main motivators for businesses to become green in the supply chain. Reverse logistics were motivated primarily by economic factors and not concerns about protecting the eco-system. The reverse logistics can only bring about profitability and reduction of waste. Advertising took this idea further and argued that Green Supply Chain Management practices are only about win-win relationships on environmental and economic performance. There are hidden values to reverse logistics and the companies need to admit it.. The customers, on average, return about 6% of the products they buy. These products can be from plastic bottles to boxes. If organizations can capture this 6% return from the consumers,they will be able to cost-save.Doing this, however, still cadaver an issue. Reverse logistics can cost-save only if done precisely. Saying this means that before going any further to green logistics, organisations must have a fondness vision to promote Environmental Management.ConclusionThe intention of this paper is to briefly provide an outline of the Green supply chain literature. This paper argues that the ecological impacts of industrial activity has been reduced by the help of Green Sup ply Chain Management.. Key academics have argued different angles to Green Supply Chain Management.The concepts of green design, green operations, reverse logistics, waste management and green manufacturing are the key themes that came out of the Green Supply Chain Management literature over the last two decades. This paper, however, briefly discussed some of these issues and, first of all, a brief introduction to conventional supply chain management was provided, then a discussion to the chronology of Green Supply Chain Management and green supply chain as a discipline. Green design and green operations were briefly discussed next. The motive for organisations to go towards green operations was dealt in the last part of this paper. Even though Green Supply Chain Management has been scrupulously reviewed, there are areas around Green supply chain that still require further study. One is a gap in the literature in terms of the stakeholders views towards green supply chain.Stakeholder s views can sometimes be contradictory to the companys point of view. Normally, when the word natural environment and sustainability comes into the picture, this is seen as a restriction to the organisations generation of profits by most operation managers and stakeholders. Some stakeholders would go against green supply chain management and some would not. This paper recommends that researchers should focus more towards qualitative study such as interviews in understanding the variation in different stakeholder views towards green supply chain management to depict the varied views about the concept and how this, in the end, implicates management decisions.
Sunday, June 2, 2019
Essay --
Hunter Reagan Mrs. Paschall Honors English IV 30 October 2013 The Good Guy RulesIn the work The Road by Cormac McCarthy a obtain and son fight down to survive in a post-apocalyptic world with evil surrounding them. They ceaselessly refer to themselves as, The hefty guys, (McCarthy 66) and try to not become evil. They identify things like cannibalism as evil, and would rather go hungry than succumb to this evil. The set about constantly tries to keep the childs eyes away from the gruesome scenes that restrict this environ workforcet. When thinking of themselves as the good guys they keep from doing any wrong. Erik J. Wielenberg puts it best when he lists the rules of the good guys. He lists them as follows 1. Dont eat people. 2. Dont steal. 3. Dont lie. 4. Keep your promises. 5. Help others. 6. Never give up. (Wielenberg 4). All of these rules also bring in Biblical implications behind them. These rules are taught by the perplex to his son. Although the commence does not alwa ys follow them.The father has a hard time following rule five, Help others. The Biblical reasoning for this rule is, And as ye would that men should do to you, do ye also to them likewise (King James Version, Luke 6.31). The child continuously wishes to help all people that dont seem to be naughtiness guys. At matchless point the man and his son find a man that was struck by lightning the child questions, Cant we help him? Papa? (McCarthy 25). The father doesnt urgency to give him any help. This conflict is exemplified when the child and father run into a man named Ely. The man seems weary of the man as shown when it is said, He looked up the highway and down. If this is an ambush he goes first, he said. (McCarthy 83). The child follows the rules better than the man as shown whe... ...s son live by seven rules that make them the good guys. They do what they have to do to survive, without compromising their morals. They are the epitome of a light shining in the darkness. The con flict of the father and sons icy opposite personalities is exemplified when looking at how they feel about the rules. The child has ease with following every(prenominal) rule barely number six, whereas the father has trouble with every rule but number six. This shows that maybe the characters complete each other. This also shows that maybe the son is better cut out for living in this variety show of world than his father is. That fact shows that the father taught the child correctly.Works SitedBible Gateway. BibleGateway.com A Searchable Online Bible in over 100 Versions and 50 Languages. N.p., n.d. Web. 14 Nov. 2013.McCarthy, Cormac. The road. saucy York Alfred A. Knopf, 2006. Print. Essay -- Hunter Reagan Mrs. Paschall Honors English IV 30 October 2013 The Good Guy RulesIn the work The Road by Cormac McCarthy a father and son struggle to survive in a post-apocalyptic world with evil surrounding them. They always refer to themselves as, The good guys, (McCart hy 66) and try to not become evil. They see things like cannibalism as evil, and would rather go hungry than succumb to this evil. The father constantly tries to keep the childs eyes away from the gruesome scenes that characterize this environment. When thinking of themselves as the good guys they keep from doing any wrong. Erik J. Wielenberg puts it best when he lists the rules of the good guys. He lists them as follows 1. Dont eat people. 2. Dont steal. 3. Dont lie. 4. Keep your promises. 5. Help others. 6. Never give up. (Wielenberg 4). All of these rules also have Biblical implications behind them. These rules are taught by the father to his son. Although the father does not always follow them.The father has a hard time following rule five, Help others. The Biblical reasoning for this rule is, And as ye would that men should do to you, do ye also to them likewise (King James Version, Luke 6.31). The child continuously wishes to help all people that dont seem to be bad guys. At o ne point the man and his son find a man that was struck by lightning the child questions, Cant we help him? Papa? (McCarthy 25). The father doesnt want to give him any help. This conflict is exemplified when the child and father run into a man named Ely. The man seems weary of the man as shown when it is said, He looked up the road and down. If this is an ambush he goes first, he said. (McCarthy 83). The child follows the rules better than the man as shown whe... ...s son live by seven rules that make them the good guys. They do what they have to do to survive, without compromising their morals. They are the epitome of a light shining in the darkness. The conflict of the father and sons polar opposite personalities is exemplified when looking at how they feel about the rules. The child has ease with following every rule but number six, whereas the father has trouble with every rule but number six. This shows that maybe the characters complete each other. This also shows that maybe the son is better cut out for living in this kind of world than his father is. That fact shows that the father taught the child correctly.Works SitedBible Gateway. BibleGateway.com A Searchable Online Bible in over 100 Versions and 50 Languages. N.p., n.d. Web. 14 Nov. 2013.McCarthy, Cormac. The road. New York Alfred A. Knopf, 2006. Print.
Saturday, June 1, 2019
Frances Welfare System Essay -- International Government
The welfare system in France is founded on the principle of solidarity. Solidarity is sense of the responsibility of the individuals in the society to help each other out. This is only for the common good (Spicker). In order to promote solidarity, France has a welfare system that includes universal entitlements, social insurance, means-tested public assistance, and tax expenditures programs. One aspect of the cut welfare system is universal entitlements. One universal entitlement under the French welfare system is health insurance. Every citizen in Frances is able to have health bid insurance. For those citizens that are employed, the employer and employee both finance the insurance. However, the establishment pays for the health care of the unemployed. In both the case of employed and unemployed, there is no deductible. Frances health care system seems to be working quite well since it is ranked as the best in the world according to the World Health Organization (Capell 2007). dispense with nursery provision for every child three years and up is another universal entitlement. Once the child is old enough to attend school, an spare universal entitlement is in place. All French citizens receive a free education. This free education does not just end after secondary education. In fact, there are 86 universities in France that are free to attend. (Rochefort). Universal entitlements are just one aspect of the French welfare system.Another circumstances of the welfare system is means-tested public assistance. For just housing alone, there are two types of means-tested public assistances social housing and mortgage subsidies. There are government owned housing for those in need like lower income citizens. In addition to government housin... ...sinessweeks, Stock Market & Financial Advice. http//www.businessweek.com/magazine/content/07_28/b4042070.htm (accessed celestial latitude 6, 2013).Evans, Martin. New Economy. Means Testing Flaws. www.martin-evans.org/as sets/files/MeansTestingFlawsNewEconomy.pdf (accessed declination 6, 2013)Rochefort, Harriet. Facts on Education in France. Education in France. www.understandfrance.org/France/Education. (accessed December 6, 2013)Spicker, Paul. The Welfare State. An Introduction to Social Policy. http//www2.rgu.ac.uk/publicpolicy/introduction/wstate.htmFrance (accessed December 6, 2013).Wingert, Jamie. Country Case Studies and Links. University of Pittsburgh. http//www.pitt.edu/heinisch/ca_fran.html (accessed December 6, 2013).2011. Making work pay. Economist 399, no. 8738 60-61. Academic Search Premier, EBSCOhost (accessed December 6, 2013).
Subscribe to:
Posts (Atom)